AutomotiveTouchup catalogs the largest paint color selection for your 2018 Toyota Mirai

HOME > TOUCH UP PAINT > TOYOTA > 2018 > CHOOSE COLOR

Select Your Paint Color for your 2018 Toyota Mirai

Chip	Color Codes	Color Description
	040	Super White II
	062	Crystal White Pearl
	1J6	Elemental Silver Pearl
	202, 207, 227	Black, Black Tone 202 & 207
	219	Celestial Black Pearl, Precious Black Pearl
	220	Sparkling Black Pearl Metallic, Sparkling Black Metallic, Sparkling Black Pearl
	3Q3	Dark Red Mica Metallic, Salsa Red Pearl
	8P4	Indigo Ink Pearl, Dark Blue Mica
	8S6	Dark Blue Mica, Dynamic Blue Pearl, Pacific Blue Mica, Nautical Blue Metallic
	8Y1	Pure Blue Metallic

CLEAR COAT IS REQUIRED WITH THIS PAINT

To ensure your paint repair blends in perfectly, you'll need to apply a clear coat over the color coat. While AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 2018 Toyota Mirai, we use the same basecoat/clearcoat system as your factory specs. You can add a clear coat to your order on the next step. The color code can be located in the driver side door jamb. The code will have a C/TR in front of it. A typical code will look like C/TR: 1D4/FH13, and 1D4 would be the color code in this example. Click here for Toyota paint code location diagrams and label examples.

Don't see your color listed?

Call 1-504-818-2334
We probably have it.

Did you choose the wrong vehicle model?

Did you choose the wrong model? How about the 2018 Toyota 4Runner, 86, Avalon, C-HR, Camry, Camry Hybrid, Celica, Corolla, Crown, FJ Cruiser, Frontlander, Grand Highlander, Highlander, Highlander Hybrid, Land Cruiser, Matrix, MR2, MR2 Spyder, Prius, RAV4, Sequoia, Sienna, Solara, Supra, Tacoma, Tercel, Truck, Tundra, Venza, or Yaris? If you're still not sure, take a look at our All 2018 Toyota Models page. Or, just go to our page dedicated to Toyota Touch Up Paint

Why The Two-Step Paint System?

Your 2018 Toyota Mirai is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

George D, owner of a 2018 Toyota Mirai from San Marcos, CA

The color matched perfectly. The only problem is the pen tip is too wide for my application. The pen tip is the size of a permanent marker. I had a rock chip which needs the ballpoint size pen tip, like the one sold by Toyota. [ATU note: the pen tip is the shape of a chisel, flat on the face, sharp along the side, and the corner is a point.]

Jim W, owner of a 2019 Toyota Highlander from Bradenton , Florida

Paint always matches up with factory finish on car.

John S, owner of a 2017 Toyota from Matthews, NC

Worked OK. I screwed up in not realizing that I had three separate coats to apply. So I missed the second coat. I just used the white & then the clear coat. So, the match is not the greatest. Not your fault, but a large warning with instructions might have helped. Would it help to apply the pearl coat over the clear coat & then apply the clear coat again? Bottom line though the fender looks better than it did with the big bruise & you have to look closely to see the difference. John S.

Share your touch up story...

MORE PRODUCTS ⇩