AutomotiveTouchup catalogs the largest paint color selection for your 2018 Ford Adrenalin

Select Your Paint Color for your 2018 Ford Adrenalin

ChipColor CodesColor Description
12, 207, 4, 6373, A2X, J2, M6373, M6373A, R1, UA, UA-6373, UAWAWHA, UB, Z
Ebony
023, 41, 417, 4PC, 4WF, 4WFA, 5W, 6466, 93J, C4C, J2, LFC, M6466, M6466A, UB, W, W7, YZ, YZ-6466
Oxford White

CLEAR COAT IS REQUIRED WITH THIS PAINT

To ensure your paint repair blends in perfectly, you'll need to apply a clear coat over the color coat. While AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 2018 Ford Adrenalin, we use the same basecoat/clearcoat system as your factory specs. You can add a clear coat to your order on the next step. The color code can be located in the driver side door jamb. Click here for the Ford paint code location chart and paint code image example.

Why The Two-Step Paint System?

Your 2018 Ford Adrenalin is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Dan S, owner of a 2018 Ford Focus from Leesburg, FL

Your products always exceed my expectations. My difficult paint is always spot on! Thank you

Matthew W, owner of a 2018 Ford Flex from Miramar, FL

I just finished applying this to my vehicle. Both the paint and the clear coat apply evenly. If you’re working at an angle other than right on top straight down, be careful that the paint and clear coat don’t run down the body of your work space. Happened to me on two occasions with the clearcoat. Had to act quickly to wipe it up before it dried. One trick, prime the pens on the flat part of the cap to get the liquid flowing, then move it to your spot. Overall, the colors match perfectly. I had to go over the clearcoat with a plastic edge to remove excess glue from the work area, minimal, but definitely needed to shave the surface down to make it smooth to the hand. It looks great. Thank you.

Share your touch up story...