AutomotiveTouchup catalogs the largest paint color selection for your 2011 Volkswagen Passat Wagon

Select Your Paint Color for your 2011 Volkswagen Passat Wagon

ChipColor CodesColor Description
2T2T, 3902, 2TSL, 2TSM, 2T, C9X, LC9X
2T, LC9X
Deep Black Pearl
3Q, LC8Z, 9937, C8Z, 3Q3Q
Mocha Brown Pearl
LB6S, 4W, B6S
4W, B6S, LB6S
Granite Green Metallic
8E8E, 8E, LA7W, E8, 9992, A7W, 83
8E, LA7W
Reflex Silver Metallic
B9A, B4B4, 9930, B4, 9021, LB9A
Candy White
D1W, D1, LD1W
D1, D1W, LD1W
Wheat Beige Metallic
W9, W9W9, LC5F, C5F
Blue Graphite Pearl
LA7T, X6X6, A7T, X6, 9792
United Gray Metallic

CLEAR COAT IS REQUIRED WITH THIS PAINT

To ensure your paint repair blends in perfectly, you'll need to apply a clear coat over the color coat. While AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 2011 Volkswagen Passat Wagon, we use the same basecoat/clearcoat system as your factory specs. You can add a clear coat to your order on the next step. The paint code is normally located in the back compartment panel in the trunk. Click here for Volkswagen paint code location diagrams and label examples.

Don't see your color listed?


Call 1-504-818-2334
We probably have it.

Why The Two-Step Paint System?

Your 2011 Volkswagen Passat Wagon is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Flora R, owner of a 2010 Volkswagen from Houston, TX

Thank you, I am very pleased with the touch-up paint,right color very satisfied, saved me about $1,094.

Andrew, owner of a 2010 Volkswagen Passat from Santa Cruz, CA

My car was keyed and it involved multiple panels. The scratches went down to the primer and I could only rub out some of the more superficial scratches. I filled and wet-sanded the scratches with your paint and the match was excellent. I later applied the clear coat, sanded, rubbing compound then polish and it looks really good. I wish the applicator brush was finer, there was a much wider paint build up than I needed. I could have been much more precise with a finer brush applicator. The clear coat goes on very irregular with a brush and may have been more "user-friendly" if it were a bit thinner. Sorry no photos.

Share your touch up story...