AutomotiveTouchup catalogs the largest paint color selection for your 2016 Fiat Ypsilon

HOME > TOUCH UP PAINT > FIAT > 2016 > CHOOSE COLOR

Select Your Paint Color for your 2016 Fiat Ypsilon

ChipColor CodesColor Description
531B
Blu Universo Mica
532B
Ebano Mica

CLEAR COAT IS REQUIRED WITH THIS PAINT

To ensure your paint repair blends in perfectly, you'll need to apply a clear coat over the color coat. While AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 2016 Fiat Ypsilon, we use the same basecoat/clearcoat system as your factory specs. You can add a clear coat to your order on the next step. Click here for the Fiat paint code location chart.

Don't see your color listed?


Call 1-504-818-2334
We probably have it.

Did you choose the wrong vehicle model?


Did you choose the wrong model? How about the 2016 Fiat 124 Spider, 500, 500 Abarth, 500E, 500L, 500X, 600E, Abarth, Coupe, or Delta?  If you're still not sure, take a look at our All 2016 Fiat Models page.  Or, just go to our page dedicated to Fiat Touch Up Paint

Why The Two-Step Paint System?

Your 2016 Fiat Ypsilon is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Roger D, owner of a 2017 Fiat 500X from Dallas, TX

Perfect match

Michael Sweeney, owner of a 2017 Fiat 124 Spider from Orange

Red can be very tricky but the color match was perfect. I did use the same color of primer that the factory used which is crucial since red doesn't cover well as a rule. In my case, it took one mist coat and four decently wet coats to get the match. The best tip is to LIGHTLY wet sand the color coat with 1500 grit wet/dry then shoot the clear on that. The clear will bring up the gloss and level very nicely. Almost a dead match for the factory paint.

Share your touch up story...