Choose your Automotive paint color for your 2000 Dodge Full Pickup

Restore Your Dodge Finish In Two Steps

Select Your Dodge's Color (Step One)

AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 2000 Dodge Full Pickup using a basecoat/clearcoat system just like factory specs. To insure a proper match, you’ll need to know your vehicle’s color code so you can find it on the chart below. 2007 and newer Dodge models usually have the paint code in the door jamb. Most paint codes are three digits long and start with a P or Q and contains letters and/or numbers. Click here for more Dodge paint code locations and paint code images.

Chip Color Codes Color Description
2000 Dodge Full Pickup Touch Up Paint | Flame Red AY110PR4, AY95PR4, PR4 AY110PR4, AY95PR4, PR4 Flame Red
2000 Dodge Full Pickup Touch Up Paint | Driftwood Satin Metallic MFA, PFA MFA, PFA Driftwood Satin Metallic

 

Don't see your color listed?


Call 1-888-710-5192.
We probably have it.

Did you choose the wrong vehicle model?


Did you choose the wrong model? How about the 2000 Dodge Avenger, Caravan, Dakota, Durango, Intrepid, Neon, Ram, Ram Pickup, Ram Truck, Stratus Sedan, T300, Van, Viper, or Wagon?  If you're still not sure, take a look at our All 2000 Dodge Models page.  Or, just go to our page dedicated to Dodge Touch Up Paint

Why The Two-Step Paint System?

Your 2000 Dodge Full Pickup is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Bryan R, owner of a 2001 Dodge Van from Austin, TX

I find your site very easy to use and prices fair. We run a used car lot and you all have been a terrific resource for getting the cars ready. Thanks, Bryan Creditland Cars

Mark S, owner of a 2001 Dodge Durango from Belfair, WA

Wow! I was afraid a bit, but excellent. Original owner left tape on the rear window too long and it bled into the clear coat. I watched the how to video's on YouTube and felt confident to make the fix. Masking product (tape and plastic) amazing. Masked off the whole area around the fender. Blended 3 base coats then followed it up after 40 minutes with 3 clear coats. I think I would of liked one more can of clear coat, but all and all it came out great. Original owner knocked off a lot of the sales price due to this problem, and it was fixed for $30 and a little elbow grease. I'd feel confident doing this to any other car or incident that pops up in the future. Very important to follow up your heavier sanding with 600 grit, with 1000 then 1500 to cut out fine lines. Watch the videos and you can't go wrong. Patience is key, can't rush the paint or the trying process. https://www.icloud.com/photostream/#A1JtdOXmzurY3 Thanks, Mark

Share your touch up story...