Choose your Automotive paint color for your 2007 Buick Lesabre

Restore Your Buick Finish In Two Steps

Select Your Buick's Color (Step One)

AutomotiveTouchup paint products are custom mixed to perfectly match the color of your 2007 Buick Lesabre using a basecoat/clearcoat system just like factory specs. To insure a proper match, you’ll need to know your vehicle’s color code so you can find it on the chart below. The color code will be located on a sticker named Parts Identification. The code can start with BC/CC followed by a U, or a WA with a four digit number/letter combination. We use the WA format for simplicity, your code may have a U. WA8555 is the same as U8555. Click here for Buick paint code location chart and paint code label examples.

Chip Color Codes Color Description
2007 Buick Lesabre Touch Up Paint | Red Tint Coat Metallic 379E, 86, WA379E 379E, 86, WA379E Red Tint Coat Metallic

 

Don't see your color listed?


Call 1-888-710-5192.
We probably have it.

Did you choose the wrong vehicle model?


Did you choose the wrong model? How about the 2007 Buick Allure, Enclave, Lacrosse, Lucerne, Rainier, Regal, Rendezvous, or Terraza?  If you're still not sure, take a look at our All 2007 Buick Models page.  Or, just go to our page dedicated to Buick Touch Up Paint

Why The Two-Step Paint System?

Your 2007 Buick Lesabre is painted at the factory with a high quality basecoat/clearcoat system. This two-step paint system consists of step one, the basecoat, which is your car’s actual color, and step two, the clearcoat, the specially formulated clear paint that protects the base color and provides the luster and deep shine your vehicle came with when new. AutomotiveTouchup products faithfully reproduce your vehicle manufacturer’s basecoat/clearcoat system.

Here's what our customers are saying about our Touch Up Paint:

Donald S, owner of a 2006 Buick from Steubenville, OH

The color match have been excellent on 4 cars I have patches up over several years. The only thing I have to learn is how to get the same gloss. It sure was cheaper than having the repair done professionally for $3500! [ATU Note: Apply 4 heavier wet coats waiting 10 minutes between coats should help. Use rubbing compound a couple days later if this doesn't help.]

Michael L, owner of a 2007 Buick Rendezvous from East Berlin, PA

I Backed into a metal Vent pipe resulting in a punctured back bumper. Purchase a can of Base color and clear from A.T.. Paint went on light first coat but but but up after 3 coats. I ran out of Base just before finishing step up of bumper. I had to order another can to finish project, still, the savings was Great! Quality of the paint and applicator nozzle made the job a breeze. It came well packaged. Clear coat went on smooth and in several passes and coats built up to a near factory finish.

Share your touch up story...